Scandinavian DIY Dresser Makeover - Before And After Project
Yous'll never know what you'll find nether the surface. With a trivial work, I took a manifestly dresser and gave it some Nordic flair.
View in gallery Hither's how that went downward! It didn't look like much, but its elementary, bonny pulls tipped me off that in that location could be potential lurking under its four coats of paint.
View in gallery Scandinavian interiors are characterized by airy, minimal spaces with lots of white and timber. The timber adds warmth to spaces that could otherwise feel cold and sterile, while graphic art and painted accents bring in personality. Near of united states of america outside of Europe know the influence of the Scandinavian style through IKEA. I might not live in a Swedish motel somewhere in a snowy birch forest, simply the homey, pared-down aesthetic all the same speaks to me.
View in gallery 
View in gallery My project dresser came with viii extraneous knobs (already removed in this photo) and several layers of pigment. The dresser appears white in this photo, just in reality information technology was foam-coloured. I knew that exposing the pine timber underneath would complement the way of the dresser, as well every bit painting the cream drawer fronts a bright white.
Here are a few elements to look for in your furnishings, if y'all want a similar look:
- Simple, directly lines
- Minimal pulls – goose egg ornate
- Neutral colours
- Blond timber
View in gallery And here'southward the arsenal you'll demand to strip back and refurbish a furniture:
Paint removal:
- Paint stripper
- After-stripper wash (methylated spirits, usually)
- Pigment scraper
- Sandpaper (120/240/400 grit) and sander
- Make clean rags
Painting over old paint:
- Spackle filler and 400 dust sandpaper, if needed
- Shellac-based primer
- Semi-gloss h2o-based enamel paint
- One quality brush that won't shed bristles
- I brush you don't intendance about
Timber varnishing:
- Matte polyurethane varnish (optional; come across below)
- Tung oil or Feed-N-Wax
- More clean rags
- Stripping paint
Dresser makeover footstep by step guide:
View in gallery I set up the drawers aside and got to work stripping the shell. Conventional pigment stripper works fast and takes off several layers at once, while citrus strippers like Citristrip are less effective only besides less toxic to deal with. I practical a liberal coat of Citristrip and let it do its thing for the side by side couple of hours. Once the paint bubbles and rises upwards from the surface, it's fix to scrape off.
View in gallery It took three separate applications to get through all of the paint. The last application was merely to get the very concluding bits off the timber. I had no interest in sanding through layers of paint, specially since I had no thought if the paint was old enough to contain lead.
View in gallery Later on scraping off all the paint, wipe down the unabridged thing with a solvent that will remove the paint stripper remainder. Citristrip has their own branded wash, which I don't heed using — it smells overnice and information technology does the task. Methylated spirits will exercise the trick for conventional pigment stripper.
One time it dried, I quickly sanded the crush using an orbital sander and 120, and then 240, grit pads. The timber was starting to clean upwardly nicely!
View in gallery Painting the drawers
Before applying primer, I filled in a few holes and dings with quick-setting spackle filler, then smoothed the patches with a fine 400-grit paper. As for the primer, I used Zinsser one-2-iii, which is shellac-based. Information technology sticks to melamine and other glossy surfaces, oil-based and water-based akin. If I don't take to spend any of my precious hours on earth trying to sand dorsum loftier-gloss pigment, I'll take it.
View in gallery I gave the drawers 2 topcoats in a white semi-gloss enamel. I adopt h2o-based enamel because it doesn't plow yellow over time, simply you lot do take to move quickly so that you don't get highly visible brushstrokes or mucilaginous, overworked areas. I let them dry for a few days — water-based enamel too takes longer to fully cure — and then they were ready to become back into the dresser!
View in gallery Varnishing the timber
There's many ways to go about varnishing timber, but in this instance, I practical a coat of matte polyurethane for durability and protection, and then a coat of Feed-N-Wax for shine. I like how wax coatings requite timber a silky experience.
Another option you could try — which fits in well with today'due south Scandinavian theme — would be using the (super cheap!) BEHANDLA furniture oil or beeswax polish from IKEA. It'southward a mix of linseed oil and wax, and information technology won't darken or discolour timber. The only downside is that it could accept quite a few coats to get a proper varnish – softwoods similar pine soak up a lot of oil. A matte poly layer prevents y'all from emptying half of the can into your article of furniture.
View in gallery 
View in gallery Before and after dresser makeover:
Timber + white is a winner! The deep blue-gray paint provides a contrasting backdrop, making the dresser stand up out. Quirky or meaningful objects bring a personal touch.
View in gallery Here'due south a couple of before-and-after photos, because those are always fun!
View in gallery With an eye for article of furniture with good lines and some elbow grease, you can bring a cast-off piece of piece of furniture into the 2010s with style. What would yous update if y'all could?
Source: https://www.homedit.com/scandinavian-dresser-makeover/
Postar um comentário for "Scandinavian DIY Dresser Makeover - Before And After Project"